Search our site

  • Free Quotes
  • WA Owned
  • Aussie Proof
  • 5 Year Warranty
  • Qualified Tradies

"Australia's Most Affordable Shutters and Shade Systems"

Measure Roman Blinds

INSIDE MOUNT

STANDARD WINDOW – INSIDE MOUNT – BLIND IS FITTED INSIDE THE WINDOW OPENING

It is an industry standard for Roman blinds fitting into the window reveals to sit flush with the front of the reveal. The factory will make the appropriate deductions for the product type and fixing position.

FACTORY STANDARD DEDUCTIONS

INSIDE MOUNT WIDTH DEDUCTION 10mm
INSIDE MOUNT DROP DEDUCTION 5mm

When drawn up the Roman Blind folds will sit back further than the head rail. This will vary depending on the drop and style of the Blind and could be as much as 70mm.
Ensure that the reveal is deep enough.

WIDTH

  • Measure neat internal width of reveal
  • Measure at three width points – top, middle and base of reveal.
  • Use shortest width measurement as blind will be drawing up the length of the reveal and may rub or jam at narrowest point if the wider measurement is used.

DROP

  • Measure neat internal drop of the reveal.
  • Measure at three drop points – left, middle and right of reveal.
    Use the shortest drop measurement.

Note

When fully drawn up the roman blind will stack up to an approximate depth of between 300mm to 450mm. This will vary according to the blind drop and the operation system.


OUTSIDE MOUNT – Blind Fitting Onto Architrave

STANDARD WINDOW – OUTSIDE MOUNT – BLIND FITTING ONTO ARCHITRAVE

FACTORY STANDARD DEDUCTIONS

OUTSIDE MOUNT WIDTH DEDUCTION 5mm
OUTSIDE MOUNT DROP DEDUCTION 0mm

WIDTH

  • Measure from outside edge of architrave to outside edge of opposite architrave.
  • Measure at three width points- top, middle and base of window. Use the widest width measurement. Add 20mm to overall width measurement to ensure no architrave is visible down sides of the blind.

DROP

  • Measure from top of architrave to base of lower architrave or floor
  • Measure at three drop points – left, middle and right. If blind is finishing at base of architrave, use longest drop and add a minimum of 30mm.
  • Blind is going to floor, use shortest drop.

Note

When fully drawn up, the roman blind will stack up to an approximate depth of between 300mm to 450mm. This will vary according to the blind drop and the operation system. Blind will sit in front of the window area.

View our range of ready-made roman blinds and custom made roman blinds.

Download Guide